Steps:

​

1. Before sticking the sticker, make sure the surface is clean and dry. Remove any dust, dirt or grease that may interfere with the adhesion of the sticker.

​

2. Carefully peel off 2 to 3 centimeters from the end of the sticker. Be careful not to touch the adhesive surface with your fingers, as this may affect its adhesion.

​

3. Position the sticker on the desired surface. You can use a credit card or similar tool to smooth out the sticker and remove any air bubbles that may be trapped underneath.

4. Smooth and apply pressure as you go, making sure to smooth out any bumps or wrinkles.

​

If your sticker doesn't line up perfectly, don't worry! Remove it carefully and try again. Vinyl is forgiving.

​

Additional Tips:

• For the big sticker ask a friend for help.

• To stick stickers on curved or irregular surfaces, you can use a hair dryer to heat the adhesive slightly. This will make the adhesive more flexible and easier to adhere.

• Add heat using a hair dryer or heat gun and apply pressure to reinforce the corner and side bonding.

• If you need to reposition the sticker, carefully remove it and re-stick it following the steps above.

• Glue only cylindrical bottles. Infinity stickers are not designed for conical cups

​

​

Enjoy your sticker!